Wedding glass

Pin
Send
Share
Send

Wedding - This is an important event in the life of each couple. I want everything to be at the highest level and the guests will remember this day for a long time. A wedding is not only the choice of dresses for the bride and groom, rings, banquet hall, hosts and more. But, it would seem, such trifles as wine glasses for young people are also an important attribute in the celebration process.
Wedding - An expensive event, so if the bride has free time, then you can make wedding wine glasses with your own hands.
Very often weddings are held in a thematic color, focusing on bright colors, for example, on red, blue, green. And in this style they design a banquet hall, a wedding cake, add accessories to dresses, and also decorate wedding champagne and wine glasses for newlyweds.
I want to show a master class on how to decorate a wine glass for a bride using satin ribbons with my own hands.
We will need:
1. Wine glass.
2. Glue.
3. Satin ribbons.
4. Guipure tape.
5. Scissors.
6. Threads with a needle.
7. Beads.

Needlework shops provide a huge assortment of satin ribbons in a large color scheme. They are cheap, so you can immediately dial a lot of ribbons that differ in width and texture. If the wedding is held without a thematic color, then you can arrange a wedding glass with classically white ribbons. Otherwise, we select and buy the colors that are needed.
For decoration, you can use beads, bead halves, sequins and other accessories.
Wine glasses can be purchased at any store of dishes. They are sold in pairs and even individually.
We take a transparent wine glass and wrap it with guipure tape, thereby measuring the length. Cut off. Lubricate the glass with glue and attach the tape to it. Almost any glue can be used. It may be special for needlework. I use glue-moment.

The guipure tape was glued.

We take a white tape 2.5 cm wide, apply it to the wine glass, measuring the desired length, grease it with glue and glue it. Irregularities are pulled to the front side of the glass, where the joints are connected. The tape can puff, so you need to follow this and smooth it.

We take a white tape 1 cm wide, measure the length, cut it off and coat with glue. We apply to the wine glass and smooth out irregularities.

We glue only 2 white ribbons.
The wine glass narrows downward, so the tapes are becoming increasingly difficult to glue. If at the very beginning our ribbon ends looked down, now, on the contrary, we will raise them up.
Now we will work with the tape in bright blue. Imagine that it is in this color that the wedding will be framed.
Measure the size, cut and glue the ribbon. We do these actions to the bottom of the glass.

The front side, where the tapes are connected, does not look very neat, but this is only the middle of the work done. No need to worry. We will continue to decorate and decorate our wedding glass.

We take 2 translucent ribbons of blue and blue. They are 0.5 cm wide. We glue them with the last blue ribbon, and wrap the stem of the wine glass.

Now we will decorate the bottom of the glass with a ribbon skirt. We take two ribbons. One wide, second narrow. We insert the thread into the needle and sew these flaxes with each other in the usual line. When tightening the thread, this will give us the opportunity to make an assembly on ribbons. In the process of sewing we tighten and try on. Tapes in the assembly should wrap the bottom 2 times.

Since the wedding glass is decorated in blue, the skirt needs to be complemented with this color. We take the blue ribbon, stitch it, assemble it and glue it to the bottom.

Now we will be engaged in the decoration and decoration of the front of the glass.
We take a ribbon 3 cm wide. We apply a transparent white ribbon to it and sew them together along the edge.

We take a blue ribbon, 1 cm wide. It will be a small bow. We attach to a wide gold ribbon to choose the size.

Cut and stitch.

We take translucent narrow ribbons: blue, blue and white. We’ll tie the bow with them, and their ends will hang down, so we focus on the required length at our discretion.

With three transparent ribbons we bind the blue and we get a cute bow.

Sew it to a wide gold ribbon.

We take a half of a bead and glue it to the bow, thereby hiding the threads, and this is also a beautiful decor.

Glue our gold ribbon with a bow to the wine glass.

That's what we got. All irregularities and places of gluing tapes are invisible.

Nearby is a wine glass for the bride in white, as a possible design option.

Pin
Send
Share
Send

Watch the video: beautiful wedding Glass decoration ideas (November 2024).