For cafes, small pubs, bars or restaurants, the bar counter is an integral element of the interior.
However, today small bar counters are quite often installed in a private house, where, as you know, kitchens are much more spacious than in apartments.
In this review, the author shows how to make a bar counter for a house from a profile pipe and boards (wooden lining).
We also recommend reading: how to make a cool chair with a footrest: from a profile pipe.
Fabrication of a metal frame
The first step will be to cut the size of the workpiece from the profile pipe. We weld a rectangular frame (frame of the front wall).
Then, from profile pipes, the author welds two U-shaped blanks.
We weld the side walls to the front of the frame, and connect them with a jumper in the upper part.
On the sides of the front and side frames, the author welds pieces of a metal strip and drills holes in them (the casing will be attached to them).
We clean the finished frame from profile pipes with a grinder with a petal circle and paint.
Metal frame cladding
At the next stage, we saw off the size of a wooden lining (boards that have a spike and a groove for joining each other).
After this, we proceed directly to the skin of the metal frame.
For details on how to make a bar counter for a house from a profile pipe and boards, see the video.
