What is better to finish the exterior walls? When building or repairing a house, this question always arises. Facade flexible tile is a great option.
It has many colors, is very durable and easy to install. Even alone it will not be difficult for you to revetment a facade.
The author of the video tells how to simplify the alignment of the tiles so that the process goes even faster. You will need plywood, large stationery clips and 6 self-tapping screws.
Decide on the distance between the lower edges of the tiles and cut out the rectangles from the plywood. Now drill holes in the plywood and clamps and fasten the parts with screws.
The main stages of work
Attach the clamps to the edges of the tiles and check the location for leveling. If you need to slightly change the tilt, the clamps can be rotated from side to side.
Now the tile can be attached. Use a stapler to fix it.
It is important at the same time to read the manufacturer's instructions and use only the fasteners that are indicated in it. Most likely, roofing nails will be needed.
After that, you just need to rearrange the clamps to the next row and continue facing. This saves time and allows you to not measure the distance for each tile.
Also, it will save you from problems with the rearrangement, if the styling was on the eye. The tile material is quite soft and it is almost impossible to get nails out of it without damaging the surface.
By looking at the wall from the side, it is easy to check the distance between the tiles. Using this simple advice, you can count on fast and perfectly even styling.
