In this review, we bring to your attention a cool idea for a house or apartment: a metal frame of a hall with shelves for shoes and for hats. It is also possible to install a mirror.
The main material for the manufacture of halls is a profile pipe. For decorative elements, the master uses a square bar with a cross section of 10 * 10 mm.
First of all, from the profile pipe, it will be necessary to weld the back wall of the hallway. On the left side, the author left a place for a mirror.
Hallway design features
From the profile pipe 15 * 15 mm and 20 * 20 mm, the author made four shelves. Three shelves are made to the width of the back wall, the fourth is a little shorter. One shelf (under the headgear) is located at the top of the frame, and the other three at the bottom.
Two front legs of the hallway are bent from a twisted pipe with a diameter of 15 mm. They are welded on the sides of the frame.
From pieces of a square bar with a cross section of 10 * 10 mm, decorative elements are made that are welded between the front and rear legs of the hallway.
On the right side of the frame where the clothes will hang, a frame welded from a profile pipe of 20 * 20 mm is attached. Then a soft padding will be attached to this frame.
On the left side of the frame "ears" are welded - for mounting the frame with a mirror. For a detailed overview of the hallway, see this video.
