A beautiful stylish table with a drawer for an apartment or a house can be made with your own hands from scraps of materials. For example, in this case, the author uses the remains of the countertop, 4 legs from the old table, as well as a piece of board and plywood.
If there are no suitable legs, then they can be made independently from wooden blocks. The first step is to cut off 4 pieces of the board on the miter saw (two long and two short) - these will be the tsars. They need to drill holes for dowels.
Next, you will need to drill holes in the legs of the table. Then the drawers must be connected to the legs. Please note that only three drawers are attached to the dowels, while the fourth is part of the drawer and is attached to the glue.
The main stages of work
To short (side) tsars, the author attaches wooden blocks to glue and self-tapping screws on which the tabletop will rest.
At the next stage, a drawer is made from pieces of plywood. It will be installed under the countertop.
Two furniture rails are screwed to the side frames, and the assembled drawer from plywood is already screwed to them. Then the fourth tsar is glued to the front side.
After that, you will only have to sand and paint everything. Since the tabletop is white, the author decided to make the legs and drawers dark. For details on how to make a stylish table with a drawer from the remnants of the countertop, we recommend that you watch in the video on the site.
