From a conventional wrench, as well as a bolt with a nut, you can make a simple hinged screw under the socket heads with your own hands. This tool is useful both in the garage and in the home workshop.
The design of a home-made hinged winch allows you to use the tool in hard to reach places. Moreover, for this device, you can take the old (and even with broken on one side jaws) wrench.
First of all, it is necessary to cut off the upper part with the cap from the bolt. If there is a stud of a suitable diameter, then you can simply cut a piece from it, so as not to spoil the bolt. A nut is screwed onto the thread.
The main stages of work
At the next stage, the master cuts off a piece of the square bar, after which you need to weld it to the nut. The welding seam must be cleaned with a grinder so that it does not spoil the appearance of the product with its "nozzles".
After that, it remains only to weld a part of the bolt with a nut and a square to the sponges of the wrench. Seams are also treated with a petal circle.
This is such a simple tool. In detail about how to make a hinged collar for socket heads from a wrench with your own hands, we recommend that you watch in a short video on our website.
