You can make a homemade spoon knife from the old car stabilizer strut, with which you can cut the recesses in the wood blanks. For example, this tool can be used to make wooden spoons.
The first thing we cut off from the old stabilizer strut is the auto part of the stock with a clip. From the "slot" you will need to remove the finger, as well as remove the boot.
As a handle for a homemade spoon knife, you can use an empty can of carbon dioxide (used for air guns).
The main stages of work
Clipped piece from the stabilizer bar is clamped in a bench vise. Using a grinder with a petal circle, you will need to make a descent to the cone. If necessary, the edges can be sharpened a little.
Then you will need to weld a metal can of CO2 (carbon dioxide) to be used as a handle. After welding, we clean the junction with a petal circle.
At the last stage, it remains only to heat the pointed part of the tool with a gas burner, and then quench in oil. Then the inside should be cleaned with sandpaper. The outside can be polished.
As a result, a homemade spoon knife was obtained from the old stabilizer strut. For details on how to make this tool with your own hands, see the video on the site.
