This simple device is useful to everyone who spends a lot of time in the country or lives in a country house. Moreover, the cost of a homemade cart for a garden hose is extremely small - available materials, namely polypropylene pipes, will be used for its manufacture.
Manufacturing process
We start work with the manufacture of blanks. For this homemade product you will need four pieces of plastic pipe 2 meters long. First, measure out two pieces of 30 cm and cut it off, and then connect them on both sides using a soldering iron for polypropylene pipes with bends (or corners) 90 degrees.
Please note that the bends on each workpiece must be directed in different directions. Next, we cut off another two pieces of a length of 10 cm from the polypropylene pipe, and solder them into 90-degree bends to get two blanks that resemble a poker in shape.
At the next stage, solder one tee into 100 mm tubes. Next, you need to "bite off" a piece of pipe with a length of 35 cm, cut it in half and connect the two segments with a tee. After that, using a welding iron, you need to connect all three parts together.
The last stage of work
Then we cut two more pieces 40 cm long and solder them along the tee. The resulting two parts must be connected to the previous workpiece. To bring homemade work to mind, you will need to cut a few more blanks, combine them into a single structure and attach two wheels to it.
Using this trolley, it will be much more convenient to store and transport the garden hose bay. The process of manufacturing this homemade product, see the video on our website.
